Pedroni Lion
: 14.11.2012 14:29:16
Fajna maszynka. Geometria jak najbardziej na czasie:
http://www.triridemtb.com/wp-content/up ... i-lion.jpg
http://www.triridemtb.com/wp-content/up ... e_LION.jpg
Although bicycles craft, the fine details are not lacking:
- 214mm stroke,
- shock absorber to 241mm,
- steering semi integrated 1 " 1/8 (44mm),
- bracket by 83mm,
- rear hub 12x150mm,
- attack ISCG '05,
- internal cable to the chassis,
- reinforcements over the wagon to make it torsionally rigid,
- CNC machining,
- the wagon can comfortably mud tires 2.5 ".
http://www.triridemtb.com/wp-content/up ... i-lion.jpg
http://www.triridemtb.com/wp-content/up ... e_LION.jpg
Although bicycles craft, the fine details are not lacking:
- 214mm stroke,
- shock absorber to 241mm,
- steering semi integrated 1 " 1/8 (44mm),
- bracket by 83mm,
- rear hub 12x150mm,
- attack ISCG '05,
- internal cable to the chassis,
- reinforcements over the wagon to make it torsionally rigid,
- CNC machining,
- the wagon can comfortably mud tires 2.5 ".
Ciekawe jak ze sztywnością ogona 
